Replacing A Hydraulic Coupler Demonstration - etrailer.com

www.etrailer.com Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information. Today we are going to show you how to replace a hydraulic coupler. In this case this one is damaged and is going to get replaced by a totally different model. First thing we are going to do is actually drain all the fluid from the master cylinder. And what we are actually going to do is open up one of the wheel cylinders and pump our fluid out and into a holding container. All right we will go to the wheel cylinder now and attach a rubber line to the bleeder valve and get our container ready. What we will do is take the cover off our bleeder valve here and we will go ahead and open it up. Okay, here we just take a rubber hose and just slide it on to the bleeder valve itself. All right and then we will just run the other half of the hose into an empty container here and start draining the fluid out of the master cylinder. And so to pump this out what we are going to do is actually we are going to use the actual breakaway lever right here to actually do the work for us. All right we will go ahead and put our cap back on. Then we will go ahead and take off our connection to our master cylinder here. When pumping it dry that will keep the fluid from coming out and ruining the paint. All right and then the next thing we will do is just unbolt our coupler. All right next is we are going to do a quick test on our new coupler. Now we are not ...



http://www.youtube.com/watch?v=tiWz-C-GK1U&hl=en

My Links : Civil Engineer Civil Engineering Soap Bar & Bath Gel Sunglasses