Modding the Plasma cars twist car (bimba) before taking them out

We added a real axle, removed the plastic nuts, favoring a metal connection. On earlier runs, at speeds around 30mph, the factory wheels melt out, and the casing bow outwards eventually slipping the wheel out. This mechanism, includes rollerblade wheels, a steel rod, washers, screws,.. it has been tested at 45MPH bearing 220+ lbs 1) purchased Roller Blade wheels miniurl.com 2) Buy threaded bolt that can fit through the wheels bearings, rod was cut to leave about 2 inches on outside of each wheel. miniurl.com 3) Washers and nuts --NNWW | Ww O wW| WWNN----------same O= wheel n=nut w=small washer W=Big Washer --- = Axle | = wheel well the small w should be same size as bearing.. so that big w doesnt run against wheel.. large W should be sized so it doesnt comes through the hole



http://www.youtube.com/watch?v=CPtGEAjOXJg&hl=en

My Links : Earrings Jewelry Review Lcdtv 3d Nx810 Deal